sheet metal forming equipment
About metal decking:
Saibo Science &Technology Machinery’s high efficiency deck roll forming lines produce roof, composite, and floor metal decks.The roll forming line can also be designed to create multiple profiles (metal deck panel, liner panel and roof/wall panel) which are roll formed and stacked in the same operation.
Metal deck is one of very component in PEB project, it have many different design, like YX35,YX44,YX53,YX75,YX114,YX135,YX153 (here number means the height of profile)and so on. The thickness range is from 0.6mm-2.0mm. Normal design is one machine one profile, but we can give one machine make different design, just need change the full forming section, we called its “cassette design”.
1. Specification of the material
| 1 | Suitable Material | Colored Steel plate, Galvanized steel |
| 2 | Width of the raw material | 1250mm |
| 3 | Thickness | 0.7mm-1.2mm |
2. Machine Detailed Parameters
| 1 | Roll Forming Machine | YX75-305-915 |
| 2 | Machine structure | Wall board structure |
| 3 | Total power | Motor power-11kw x2 Hydraulic power-5.5kw |
| 4 | Roller stations | About 30 stations |
| 5 | Productivity | 0-15m/min |
| 6 | Drive system | By chain |
| 7 | Diameter of shaft | ￠85mm solid shaft |
| 8 | Voltage | 380V 50Hz 3phases (Customized) |
| 9 | Color Of The Machine | Yellow and blue |
| 10 | Container need | 40HQ container |
| 11 | Deliver Time | 70 days |
| 12 | Terms Of Payment | 30%T/T 70% pay before shipment |
3. Profile drawing
4. The Chart of Process Flow
5. Specification of Components
(1) 5T Manual Un-coiler
- Width of feeding: 1250mm
- Capability: 5 Ton
- Inter diameter: 500-590mm
- Maximal out diameter: 1500mm
- Mode of expand &fight: inner expand &fight by manual
- Way of feeding: manual
(2) Main Roll Forming Machine
- Roller material: ASTM1045 chrome plated surface with hardness, CNC
- Shaft diameter: ￠85mm material: SAE1045 with quenching and tempering
- Main frame by 350H beam welding
- Machine structure: wall board
(3) Hydraulic cutting system
- Cutting after forming: Cut the sheet after roll forming to required length
- Uses two hydraulic cylinders for operation.
- Material of blade:Cr12, 58-62 HRC hardness
- Cutting power by hydraulic,5.5KW
- Working pressure: 12Mpa adjustable
- Length measuring: Automatic encoder length measuring
- Tolerance of length: +/- 1.5mm for each piece end product
(4) Computer Control Cabinet
- Programmable setting of profile length and quantity
- Operating system language: English and Chinese
- Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved
- PLC: Panasonic or customerization
Product Tags:
|
|
11KW X 2 Floor Deck Roll Forming Machine Chains Drive Wall Board Structure Images
|
